Inventory Unit Detail
2023 Bush Hog 1D7818 Lift Disc Harrow
$2,599.99
Shopping ToolsTools to help you in your buying process.
$2,599.99
Overview
Product Features
Description
Bush Hog® 1D78 Lift Disc Harrow.
Bush Hog’s line of lift disc harrows is designed to expand your tractor’s productivity potential! Whether you are a gardener, small farmer, wildlife manager, landscaper, operate a nursery or simply someone looking to break up the ground, the heavy duty frames and the heat-treated notched disc blades of Bush Hog® lift disc harrows make them the right choice for the job. The three disc harrow series in the Bush Hog® line are designed to fit tractors from 35 to 95 horsepower, giving you several choices to properly fit your tractor and application. Easy-to-adjust front and rear gangs allow you to change from light tilling to more aggressive cutting action with a simple pull of a pin and repositioning of the gangs. The sky, well actually the dirt, is the limit when using a Bush Hog® lift disc harrow to solve your groundbreaking needs.
- Bearing hangers reinforces with gussets.
- Easy-to-grasp handle for simple gang adjustment.
- Notched discs for maximum cutting action.
- Adjustable gang angles, front and rear, using an easy-to-grasp handle.
- Cat 1 standard and quick hitch.
- Variable Blade Spacings Available: 9" front and rear gangs for tough-to-cut "New Ground". 7 1/2 in. front and rear gangs for finer soil finishing; 9 in. front gangs / 7 1/2 in. rear gangs – The best of both worlds.
- Square and rectangle tube steel frames and gang tubes.
- Self-aligning, sealed ball bearings.
- Notched disc blades for maximum cutting action.
- 1 in. square, high carbon steel gang axle.
- Available in tractor colors.
- Optional disc scrapers.
- Hitch Type: Cat. 1 Std and QH
- Max Cultivation Width: 78"
- Approximate Load On Each Blade: 30-32 lbs.
- Disc Blade Side Notched: 6" or 18"
- Disc Blade Spacing: 9" Front, 7 1/2" Rear; 9" Front and Rear; 7 1/2" Front and Rear
- Disc Blade Bearing: Self Aligning, Sealed Ball Bearings
- #Number of Blades: 2 Per Gang
- Forward Gang Angle Adjustment: Front Gangs – 0 deg., 7 deg., 14 deg., 21 deg.
- Rear Gang Angle Adjustment: Rear Gangs – 7 deg., 14 deg., 21 deg.
- Mainframe Front Tube Construction: 2" Square Tubing
- Gang Arm Construction: 3" X 1 1/2" Tubing
- Gang Axle: 1" Square, High Carbon Steel
- Disc Scrappers: Optional
General
Cutting Width | 78 in. |
Number of Disc Blades | 2 Per Gang |
Disc Spacing | 9 in. Front, 7 1/2 in. Rear; 9 in. Front and Rear; 7 1/2 in. Front and Rear |
Shopping Tools
Quote by Phone

(651) 459-1441
- Store Hours Open Close
- Mon - Fri: 8:00 a.m. 5:00 p.m.
- Sat: 8:00 a.m. Noon
- Sun: Closed